Products & Brands
We have the right pump for the job. We specialize in providing solutions to all your challenging fluid transfer applications and support the life expectancy of the products we supply and your projects and systems.
Pump Products
We specialise in providing solutions for your challenging fluid transfer applications by recommending and supplying the right pump for the job, but not limited to all major OEM Brands in order to meet and comply with your needs , requirements and specifications.
- API 610 - Current Edition Compliant
- ISO 5199 & 2858
- DIN / EN733
- End Suction BPO
- Submersible Pumps
- Self- Priming Pumps
- Vertical Turbine Pumps
- Multistage Pumps
- Horizontal and Vertical Axial Split Case pumps
- Internal and External Gear Pumps
- Rotary Lobe
- Air Operated Diaphragm
WEMCO
Wemco Solids-Handling Centrifugal Pumps
The WEMCO is a complete range of rugged & dependable centrifugal solids handling pumps comprising the following ranges:
– A self-priming, solids handling, trash pump. A solids handling pump that is suitable for a wide range of applications. True solids handling pumps for tough jobs.
– The Chop-Flow pump that chops as it pumps, keeping oversized solids and stringy material from clogging your downstream process.
– The Torqueflow range of non-clogging recessed vortex-type impeller pump.
– The Non-Clog range with the ability to handle large solids up to 75 mm in size.
Wemco - Torque Flow Pump
Capacity to: 0 – 230 ft. (70.1 m³/h)
Head to: 56 m
Temperature to: 83°C
Viscosities to: 200 cps
Applications
Wastewater treatment Grit & sludge Chemicals Abrasives Fluids with large solids
Wemco - Hydrogritter Grit removal system
Capacity: 220 to 1,570 gpm (50 to 357 m³/h)
CYCLONE PRESSURE : 5 to 20 psi (.3 to 1.37 bar)
Temperature to: 2°C
32ºF (0°C) – 122ºF (50°C)
Applications
The WEMCO® Hydrogritter is an exceptional grit cyclone and classifier with an enduring operational life of over 25 years.
Wemco - Screw Flow Pump
Capacity to: 2270 m³/hr
Head to: 105 m
Temperature to: 83°C
Viscosities to: 200 cps
Applications
Handles 75 mm sphere in all pump sizes. Prime assist by vacuum option is available. Portable, diesel engine drive trailer mounted option available
WSP
Wemco Solids-Handling Centrifugal Pumps
The WEMCO is a complete range of rugged & dependable centrifugal solids handling pumps comprising the following ranges:
– A self-priming, solids handling, trash pump. A solids handling pump that is suitable for a wide range of applications. True solids handling pumps for tough jobs.
– The Chop-Flow pump that chops as it pumps, keeping oversized solids and stringy material from clogging your downstream process.
– The Torqueflow range of non-clogging recessed vortex-type impeller pump.
– The Non-Clog range with the ability to handle large solids up to 75 mm in size.
WSP - SELF PRIMER
SIZE RANGE & DIMENSIONS 2, 4, 6, 8, & 10 inch
Head to: 3, 4, & 6 inch
Temperature to: 32ºF – 180ºF (0ºC – 83ºC)
CAPACITY HEAD 103 – 250 ft (31 – 76 m)
FLOW 225 – 3,200 gpm (51 – 727 m³/h)
MATERIALS CASE Ductile iron, CD4MCu IMPELLER Cast steel, Hi-Chrome, CD4MCu
Applications
The WSP™ Self-Primer pump is a rugged and dependable self-priming, solids handling, trash pump. Distinguishable from our competitors, the WSP™ Self-Primer pump design allows for a shim-less, tool-less impeller adjustment and ease of suction flap valve replacement.
WSP - NON - CLOG PUMP
Capacity to: Up to 10,000 gpm (2,498 m³/h)
Head to: Up to 300 ft. (76 m)
Temperature to: 5°C to 121°C
Applications
he WSP™ Non-Clog is a heavy-duty pump perfectly designed to maintain high hydraulic efficiencies while handling large solids. The WSP™ Non-Clog pumps were designed and developed using advanced technology to meet demanding market requirements. The Non-Clog design is a vastly improved, modernized design compared to conventional non-clog pumps in the marketplace.
WSP - CHOP FLOW PUMP
Capacity to: Up to 9,000 gpm (2,044 m³/h)
Head to: 152 m
Temperature to: 32°C to 200°C (0ºC to 93ºC)
Applications
Handles 75 mm sphere in all pump sizes. Prime assist by vacuum option is available. Portable, diesel engine drive trailer mounted option available
WSP - FOOD TRANSFER PUMP
Capacity to: 1040 m³/h
Head to: 56 m
Temperature to: 83°C
Viscosities to: 200 cps
Applications
Handles 75 mm sphere in all pump sizes. Prime assist by vacuum option is available. Portable, diesel engine drive trailer mounted option available
FLOWAY
Floway® VTP (Vertical Turbine Pump) is a vertical close coupled, single or multistage turbine pump, with a cast or fabricated discharge head, top-mounted motor, and closed suction or wet pit design. This pump is available in a variety of material combinations for multiple applications. The Floway® VTP features a special tolerance motor coupling and jacking posts for precise motor and pump shaft alignment, special impeller balancing, and reduced run-out on motor base resulting in industry leading low vibration levels. In addition, the Floway® VTP has a tapered collet impeller mounting option for easy installation, lateral adjustment, and low hydraulic thrust, and a semi-open impeller option for solids handling capability, or a flanged column option for ease of assembly.
FLOWAY - VERTICAL TURBINE PUMP
CAPACITY FLOW: Up to 15,000 GPM (31400 m3/h)
HEAD PRESSURE: Up to Up to 300 ft. (91 m)
TEMPERATURE RANGE: 32°F – 180°F (0°C – 82°C)
Applications
Water Supply , RO Treatment Pumps , Dewatering Pumps , Seepage Water Pumps , Reclaim Water Pumps, Overflow Water Pumps , Barge Mounted Pump ,Treated water ,Booster, Effluent disposal , Lake or river raw water intake ,Service water, Well water, Screen was, Reverse osmosis, Corrosive water services ,seawater & brackish water , Snow Making
FLOWAY - VERTICAL TURBINE PUMP
CAPACITY FLOW: Up to 35,000 GPM (8,00 m3/h)
HEAD PRESSURE: Up to Up to 3,000 ft. (200 m)
TEMPERATURE RANGE: -130°F – 450°F (220°C)
Applications
The Floway® VHP pump is API 610 current edition compliant, vertical close coupled, single or multistage turbine pump, with a fabricated discharge head, top mounted motor, and wet pit (VS1) or closed suction (VS6). The Floway® VHP can withstand higher pressures with premium efficiencies and low operating costs. The available low-NPSH impeller allows for a reduced barrel length. The pump bowl assembly is characterized as low energy per stage resulting in a broad flow range with excellent hydraulic stability.
FLOWAY - Submersible
CAPACITY FLOW: Up to 30,000 GPM
HEAD PRESSURE: Up to Up to 750 ft. (52 m)
TEMPERATURE RANGE: -40°F (-40°C)– 175°F (80°C)
Applications
Available in wet pit or closed suction designs, this submersible vertical pump is also available in a selection of material combinations. The Floway® VSB has a compact connection between the pump and motor which provides maximum shaft support, the flanged column option allows for ease of assembly, an internally mounted power cable eliminates potential hazards, and motor with water-tight insulated windings ensures improved cooling, extended life, and ease of maintenance.
ROTO-JET
The operating characteristics of the Roto-Jet® pump are simple and similar to a conventional centrifugal pump. Energy is added to the fluid via the rotor, and the stationary pitot tube converts the fluid velocity energy into static pressure.
Features and Benefits:
- No external lube system required
- No wear rings or close running clearances
- Robust design is insensitive to process upsets
- Pulsation free flow over the entire head-flow curve
- Reduced life cycle cost by optimizing hydraulic efficiency
- Process seals exposed only to suction pressure for maximum seal life
- High heads achieved in a single stage at low operating speeds compared to other low-flow, high-head pumps
ROTO-JET® PUMP
Capacity to: to 5500 ft. (1676 m) Flow: to 750 gpm (170 m³/hr) )
Temperature to:32ºF to 550ºF (0ºC – 288ºC)
Size Range/ Dimnesion: 1.5 to 3 in (38 to 76 mm)
Applications
Roto-Jet pumps are high pressure single-stage centrifugal pumps using advanced pitot tube technology and are designed to handle tough applications across multiple industries. .