SAER PRODUCTS
SAER is a leading Italian producer and supplier of surface and submersible pumps and motors, with over 60years' experience. SAER provide their customers and partners with maximum flexibility and innovation thanks to an advanced internal design department and their constant research and development, allowing them to offer highly customised products in very short times, with all the guarantees of Made in Italy quality.
End Suction Range
NCB -
STANDARDISED BARE SHAFT PUMPS - ID 12


Centrifugal pump meeting EN-733, used for firefighting, heating and cooling systems, water supply, irrigation, industry and the naval and mining sectors. Various types of mechanical or soft shaft seals and wear rings are available, depending on the required application. The pump can also be supplied coupled to a diesel engine.
Materials: super duplex, cast iron, ductile iron, stainless steel and bronze.Video
Download catalogue
Description
MAXIMUM FLOW RATE | 675 | m³/h | |
MAXIMUM HEAD | 129 | m | |
MAXIMUM POWER | 90 | kW |
NCBK - HIGH FLOW-RATE BARE SHAFT PUMPS MEETING AND EXCEEDING EN 733 - ID 13


Download catalogue
Description
MAXIMUM FLOW RATE | 2300 | m³/h | |
MAXIMUM HEAD | 97 | m | |
MAXIMUM POWER | 400 | kW |
NCA - ELECTRIC PUMPS FOR DRAINAGE AND WASTEWATER FOR DRY INSTALLATION- ID 14


Suitable for pumping domestic and industrial foul water, viscous and corrosive liquids, liquids with fibrous and solid substances, agricultural slurry, as well as generally dirty and muddy water.
Materials: cast iron, stainless steel.Average delivery time: 15 working days.Download catalogue
Description
MAXIMUM FLOW RATE | 1600 | m³/h | |
MAXIMUM HEAD | 60 | m | |
MAXIMUM POWER | 160 | kW |
Mono Block
IR - STANDARDISED MONOBLOC ELECTRIC PUMP ID -15


Average delivery time: 5 working days.Download catalogue
Download the dimensional drawings 2D/3D

Description
MAXIMUM FLOW RATE | 450 | m³/h | |
MAXIMUM HEAD | 129 | m | |
MAXIMUM POWER | 45 | kW |
L Series Inline
L - IN-LINE
ID 16


Video Download catalogue
Description
MAXIMUM FLOW RATE | 580 | m³/h | |
MAXIMUM HEAD | 90 | m | |
MAXIMUM POWER | 75 | kW |
Vertical Multistage
MK - MULTI-STAGE VERTICAL PUMPS
ID 17


Compact, multi-stage vertical pumps, suitable for lifting plants with or without autoclave, irrigation and washing systems and all other applications where high pressure is required. These pumps are configured with a bearing designed to support the axial thrust of the pump and allow coupling to any other standardised motor. Dual wear ring and bushes to guarantee maximum reliability.
Available the close-coupled version MKM as well, with reduced overall dimensions and reduced costs.
Materials: cast iron, stainless steel.
Average delivery time: 8 working days.
Download catalogue
Description
MAXIMUM FLOW RATE | 110 | m³/h | |
MAXIMUM HEAD | 394 | m | |
MAXIMUM POWER | 55 | kW |
Submersible SD
SD - SUBMERSIBLE WASTE WATER PUMPS EXCLUSIVELY MADE BY SAER - ID18


Coming from SAER unmatched knowledge in the borehole pumps and submersible motors field, the brand new SD series,
submersible wastewater pump is now reality. Designed for managing waste, raw and sewage water.
Featuring
• Anti clogging vortex impellers (type V)
• Multi-channel helical open impeller to pump charged liquids, also in presence of fibrous substances (type P)
• Multi-channel open impeller with helical channel wear disc. minimized risk of clogging (type O)
• Closed peripheral impeller for top efficiency in pumping charged liquids with low fibrous substances (type C)
Thanks to the state of the art hydraulic design and premium motor efficiency made in SAER you will have a cost saving product with low energy consumption.
Exclusive protection for the double mechanical seal:
immersed in the oil chamber, it stays in a protect environment even in heavy-duty applications, with your peace of mind.
High-grade resistant material (cast iron, stainless steel aisi 316 and duplex 5 A), several types of coating solutions and know how of more than 65 years in the water treatment field deliver you a guaranteed product.
MATERIALS: cast iron, stainless steel, DUPLEX
Materials: cast iron, stainless steel, DUPLEX.
Download catalogue
Description
MAXIMUM FLOW RATE | 400 | m³/h | |
MAXIMUM HEAD | 30 | m | |
MAXIMUM POWER | 22 | kW |
Axial Split Case SKD
SKD - HIGH FLOW RATE SPLIT
CASING PUMPS - ID19


One of the few examples of this type of product designed and produced in Italy, as proven by the short delivery times. High efficiency and reliability provide a pump with minimal maintenance costs. The pump can also be supplied coupled to a diesel engine. Various types of mechanical and soft shaft seals (standard). Applications: dams, municipalities, power plants, mining, irrigation, water supply whenever high flow rates are required.
Materials: super duplex, cast iron, bronze.
Average delivery time:15 working days.
Download catalogue
Description
MAXIMUM FLOW RATE | 5000 | m³/h | |
MAXIMUM HEAD | 280 | m | |
MAXIMUM POWER | 1200 | kW |
Multistage
TM-TMB - MULTI-STAGE HORIZONTAL
PUMPS - ID20


One of the most complete product ranges in the sector, with over 160 different versions available. For applications where high pressure is required, such as lifting, refrigeration or heating plants, artificial snow or irrigation, washing systems and boilers. Low noise and high resistance to wear, thanks in part to the oversized ball bearings. This pump can also be coupled to diesel engines with SAE3 connection. Soft shaft seal as standard, various types of mechanical seal also possible.
Materials: super duplex, cast iron, stainless steel, bronze and DUPLEX.
Description
MAXIMUM FLOW RATE | 850 | m³/h | |
MAXIMUM HEAD | 642 | m | |
MAXIMUM POWER | 710 | kW |
TMVZ
TMV - MULTI-STAGE VERTICAL PUMPS
ID 21


Suitable anywhere high pressure is required, such as lifting, refrigeration or heating plants, artificial snow or irrigation, washing systems and boilers. Low noise and high resistance to wear, thanks in part to the oversized ball bearings. Possibility to change outlet and inlet orientation. Various types of mechanical or soft shaft seals (standard).
Materials: super duplex, cast iron, stainless steel, bronze and DUPLEX.
Average delivery time: 15 working days.
Description
MAXIMUM FLOW RATE | 310 | m³/h | |
MAXIMUM HEAD | 403 | m | |
MAXIMUM POWER | 250 | kW |
Submersible Multi-Stage
S-151 - SEMI-AXIAL ELECTRIC PUMPS
ID 22


Designed to guarantee the highest levels of performance even in harsh environments, such as mining and offshore applications, the investment cast impellers and diffusers offer excellent wear resistance together with the standard counter thrust ring and guide bushings. The S series is ideal for borehole pumping with a minimum diameter of 158 mm. Also available in a horizontal version. Typical applications include agriculture, mining, offshore installations, civil and industrial uses. Each pump can be adapted from the standard configuration to meet a wide range of application requirements.
Materials: cast iron, carbon steel, stainless steel, bronze, DUPLEX.
Average delivery time: 6 working days.
Description
MAXIMUM FLOW RATE | 90 | m³/h | |
MAXIMUM HEAD | 390 | m | |
MAXIMUM POWER | 37 | kW |
Submersible Motor
CLE 95 - REWINDABLE OIL FILLED SUBMERSIBLE MOTOR - ID 23


Completely rewindable, non-toxic oil-filled submersible motors. The “E” version has been designed to offer better value for money than the CL series: the only difference is reduced axial thrust (1500 N in the CLE version compared to 3000 N for the CL version), but it is manufactured from the same materials. Extremely reliable motors, tested as standard, which can be coupled to any submersible pump, not just SAER models, thanks to the NEMA coupling. For temperatures up to 25°C.
Materials: cast iron, brass, 304 and 316 stainless steel.
Average delivery time: 3 working days.
Description
POWER | 1 ~ 0,37÷1,5 kW | |
3~ 0,37÷1,5 kW |